Skip to Content

Changes for page ANU Seismic Data Loggers

Last modified by robert on 2025/04/24 14:58
From version 25.1
edited by robert
on 2024/01/23 12:39
Change comment: There is no comment for this version
To version 26.2
edited by robert
on 2024/02/13 12:51
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -12,11 +12,11 @@
12 12  
13 13  = Data Card Formatting and Information =
14 14  
15 -Both the TerraSAWR and LPR-200 require SD Cards to be formatted in FAT32 filesystem. For 64Gb cards it can be difficult to format in FAT32, but software is available (link this). ANU recommend SanDisk Extreme 150 mb/s cards in either 32 or 64Gb size. We strongly discourage using cards larger than 64Gb.
15 +Both the TerraSAWR and LPR-200 require SD Cards to be formatted in FAT32 filesystem. For 64Gb cards it can be difficult to format in FAT32, but [[software >>http://auspass.edu.au/field/fat32cardformatter.exe]]is available. ANU recommend SanDisk Extreme 150 mb/s cards in either 32 or 64Gb size. We strongly discourage using cards larger than 64Gb, and in general smaller cards are less likely to fail. We have also found that "adapter" cards (e.g. SD to microSD) are prone to having write issues and **strongly** advise against them.
16 16  
17 -The units can be "pre-programmed" with information (e.g. site name, sampling rate, etc) or they can be programmed on the fly. To program the cards you simply edit a text file (named "ANUSRSetup.txt" for the LPRs, or "tSAWRSetup.txt" for the TerraSAWRs) and place it in the root directory on the SDCard. When the logger boots up, it will parse and load this information.
17 +The loggers can be "pre-programmed" with information (e.g. site name, sampling rate, etc) or they can be programmed in the field using the buttons on the logger. To pre-program the cards you simply edit a text file (named "[[ANUSRSetup.txt>>http://auspass.edu.au/field/ANUSRSetup.txt]]" for the LPRs, or "[[tSAWRSetup.txt>>http://auspass.edu.au/field/tSAWRSetup.txt]]" for the TerraSAWRs) and place it in the root directory on the SDCard. When the logger boots up, it will parse and load this information.
18 18  
19 -The format for "ANUSRSetup.txt" / LPR200s will be a single line of text that looks like this:
19 +The format for ANUSRSetup.txt / LPR200s will be a single line of text that looks like this:
20 20  
21 21  {{{XXX195G0100010034864 2 }}}
22 22